Відео

How do you put the gas filter in?

How are the chainsaws holding up after 5 years

I have the same model , the H & L will only turn half

I'm just finding this video, man I've bought one last summer and it's been giving me hell to get the settings right. Chainsaw 5200.

Great info. I did not realize the difference the regulators made.

So what does turning the flat head on the high and low do? Does it adjust anything? I messed with it some before I found this video and they don’t even go a full turn but it will turn with a flat head

Let me try with you master ...I got an HUSQVARNA 326 that when pulling the robe it gives a little sign that want to start but because something is wrong it want start......Could you give me an idea what I need to do ?

Thx!!!!

I'm not sure if your still around since this video is old but I have a Husqvarna 120 Mark ll and the idle screw has to be turned out I think 3 turns or the choke won't stay out. So my question I guess is would I turn it out another 1 and a quarter turns from that? My problem all started when a friend said it(the saw) needed adjusted well it hasn't ran right since and I've now changed the fuel lines the fuel filter so now I'm trying to adjust it. I need it to run that's what lead me here

Aweesome vid

First rate info, just retuned my Oleo Mac 400, after watching your video. Clear & concise. As you say over the pond Great Job and thanks again

Why won’t this video let me subscribe to your channel? Or share?

Rich and lean ?

Best demo I’ve seen using all 3 screws

Very cool

Awesome

I’m behind you! Newly subscribed

I m a female in Georgia and grew up in the wood/logging-sawmill endustry and now my daughter and her arborist husband own the multiple companies from tree services to sawmills and I already was impressed with many items from china so I’m very happy to have found this and will pass along the info. I’m the piddler. .. I take their scraps and piddle out something …always piddling!

Have a 510 echo chain saw that won’t start clean carburetor chain sparks plug an coil sparking an still won’t start

Give this legend a thumbs 👍🏻 up All the way from Australia 🇦🇺

I want to say thank you!! Your presentation was easy to follow, and you are well-spoken. I appreciate you taking the extra time to point out the danger area of the high side. My saws run like new again. Thanks again. 👍🏻

Nice job homie. Appreciate that

Im having trouble to understand the last part. Im not great with telling by sound...

P diddler? 😮😂

Or just don't use any regulator at all!

Finally someone explains what all 3 screws do instead of just the H & L. Best carb adjustment video out there. Thanks for this.

good sharing...tq

A lot of unnecessary talking, I mean a lot! But not really saying anything about tuning low end. We saw you looking ,then adjusting . But you didn't explain what you were looking for and why you needed to adjust.

The machinery industry is not just about technology but also about innovation and application.

I really need to see how it performed cutting a tree and how much power it has

Can I see you cut some firewood or a tree

Thanks

god bless ya, F off. keep your god shit to yourself.

Works Great

I see so many tuna carburetor adjustment, and I think you’re the best because they didn’t tell you you got a turn in the only lotta lotta people just do it but they don’t tell you turn in and turn out. Thank you.

Take a Dremel and cut a fine notch in the adjustment screws for a flathead screwdriver then all you needs a foathead

my husky 455 rancher came straight out of the shop brand new with a normal slotted set of carb screws (bought in uk in 2022) id been trying to get a splined driver to fit, eventually took the case off, couldnt believe id been wasting my time !

A great video man

I take the tamper resistant collars right out. New subscriber here. thank you for the video

I take the tamper resistant collars right out . Thank u for the video . New subscriber here.

kókler

Worked for me! Thanks!

My saw's a Poulan that doesn't run with factory settings, so let's do it to it.

Thank you for your great lesson. You did a great job and I appreciate it.👍🏻🇺🇸

I built a 2 burner for a brick forge I made. Would really appreciate if I could FaceTime for some helpful tips I. The flame. Thank you and have a good one!

Thank you

Jic to mpt

😅 lame

I have 2 of the 6220 's so far superb , just change the chain to something better

even though an old video on chainsaw tuning, i was fortunate to run into this video just the right timing. i checked all over UT and this was the most easiest one to follow. i did exactly as he said and wrote the steps to follow. next morning i put the chainsaw blade area on the vise as shown in video and wood blocks to keep it proper heigh level. i got the common tools to fit into the holes. did as he said. took me couple pull and it started. while running, i adjusted the low/high and idle as he prescribed. now this chainsaw will be very useful to cutdown firewood for my grill. thanks for the belated video.Bob